Browse Parts

With its durable construction and precise engineering, this product is a must-have for any boat owner looking to maintain the optimal functioning of their inboard engine. Was full of oil when removed so no leaks.

These mufflers have inside baffles, see pictures. These mufflers were removed from a 1981 Correct Craft Ski Nautique, are in good condition. Heavy duty thick fiberglass. Very useable. Dirty and paint is pealing, see pictures.

Was removed from a 1984 Shamrock 20 ft with a PCM 302 Marine made motor. This Used Flywheel with Starter Ring Gear was removed from a 302 motor. 1986 Shamrock with a PCM motor. Marine 302. Flywheel Starter Ring Gear.

This used Rudder, Rudder Port, and Tiller Arm removed from a 1984 Correct Craft 2001 Ski Nautique Boat. Is straight and has a few dings and marks but NO any indication of striking anything. Has no cracks, see pictures.

This used Rudder, Rudder Port, and Tiller Arm were removed from a 1990 Mastercraft 190 Ski Boat. Is straight and has a few dings and marks but NO any indication of striking anything. Has no cracks, see pictures.

4 used Stainless Steel painted blue swim platform brackets. The Teac wood platform has been coated and is pealing. Needs a good sanding and Teac oil. Or sand and paint again. Has marks and dings, see pictures.

This Used ski Pylon is from a 1984 Correct Craft Ski Nautique 2001 ski boat. Has been used but seam to be functional, and has many dings and marks, see pictures. Bottom mount for ski pylon is a little corroded, see pictures.

Were removed from a 1988 Supra Saltare boat. Was full of oil when removed so no leaks. Hoses are old and will need to be checked before use. Needs a good cleaning, just got a light pressure washing.

This Used ski Pylon is from a 1990 Mastercraft Prostar 190 ski boat. Has been used but seam to be functional, and has many dings and marks, see pictures. Bottom mount for ski pylon is a little rusted, see pictures.

Removed from a Correct craft Ski nautique. Made in the United States, this propeller shaft features a 1-1/2" hose compatibility for easy installation.

Fits Mastercraft boats from 1988-1990, or boats with 5 piece windshield. 1988- 1990 Mastercraft Prostar 190. Has been used but seam to be functional, front glass has no scratches or marks to the coating, is dirty and needs a cleaning.

They were removed from a 1984 Ski Nautique 2001 boat. Have been painted. Good usable condition no bends. Need a good cleaning and painting if wanted. They are designed to provide a proper fit and function for your boat's exhaust system, ensuring optimal performance and durability.

The Volvo Penta Raw Water Pump 3829313 is a high-quality boat part designed for use in luxury yachts. NO impeller in pump, needs impeller and gasket???.

Copper DWV. and are stamped with Reading + DWV to mark as hot water pipe. Can be used on many inboard boats like Chris Craft, Lehman, etc. Marine Exhaust Pipe. These two used Exhaust pipe mufflers OEM were removed.

Most of these pieces were never installed on the boat. Most of the original parts have marks, dings and cracks, see pictures. The Shamrock 17-20 Ft Teak And Starboard Body Deck Parts Lot consists of various boat parts manufactured in the United States.

For a Supra Rider 1983 wakeboard ski boat. It is made in the. 1983 Supra Rider Boat. from a Supra Rider 1983. Looking for a part ask we may have it. The open bow windshield with wing windows and vents is from a.

The shifter and cables move freely, the shifter lock is a little stiff. Dirty and needs to be cleaned, see pictures. Cables are dirty and need to be cleaned. 2 -16ft used cables Boat.

Small boats. Perfect for those looking for a high-quality and locally-made product to enhance their boating experience. Is dirty and needs a cleaning, see pictures.

Used but are visually straight with no major dings or scrapes from rounding. Seam to be functional as is. See pictures. Actual photo of item.

Has not been tested. Has many marks, slight corrosion, and chipped paint, see pictures.

Can be used a number of ski boats from the 1960's to 1990's. Dirty, corrosion, stained, and needs to be cleaned, see pictures. No mating hardware for flip mounts Are usable as is.

Gauge Clusters Dash Pads LOT CAR. Removed from Saab 900 and 99. Saab 900 99 OEM. Have not been tested. Misc Saab 900 99 Interior parts as shown in pictures, Need to be cleaned. These are used removed from Saab 900 99 OEM.

These are two doors been storing for years in the warehouse remaining from a long gone project truck. They have no glass or internals, just mainly the shell and outside door handles. They have nicks, scratches and dings, see pictures.

This used Rudder, Rudder Port, and Tiller Arm removed from a 1990 Mastercraft 190 Ski Boat. Is straight and has a few dings and marks but NO any indication of striking anything. Has no cracks, see pictures.