Browse Parts

ABOUT THE PART All Balls 56-132 - 41mm x 54mm x 11mm - Fork & Dust Seal Wiper Kit. Plus, the only complete line of dust wipers! Wipers should be replaced with the fork seals to assure peak performance.

Kawasaki KLX140G & KLX140RL only. Fork Springs - KLX140G, 17-Present. Important Note: These springs will only fit the KLX140G / RL (21"/18" wheel models). They are not for use in the standard KLX140 or KLX140R.

ABOUT THE PART Low friction fork seal solution which improves feel and comfort,while increasing the reliability through better dirt exclusion. The cake itself is doubling the fork seal life". Reduced wear and air suction.

Ringer Fork Seal Driver, 48mm. Fork Seal Bullet, 48mm - Orange. Open wound DS spring: this is not just a stretched std. spring but a dedicated fork seal spring with open winding. Improved followability capability of the seals to conform to fork tube deflection.

BBR heavy duty fork springs & shock spring combo kit. BBR optional stiff (650-HCR-8005). 44kg. Honda 2003-2007 CR85R / CR85RB. Custom developed by BBR Motorsports for the ultimate upgrade for mini four-strokes.

Adjustable rebound and compression Remote aluminum reservoir with stainless hose Hard anodized aluminum body Improved damping, even in race conditions Far better performance than stock Complete with spring

Custom developed by BBR Motorsports for the ultimate upgrade for mini four-strokes. Sized perfectly for fast/aggressive adult mini racers. This will result in bent fork legs! BBR Spring Rate: 1.0 kg.

2021-on Kawasaki KLX140RL (19/16" wheels). 2008-2020 Kawasaki KLX140L (19/16" wheels). Important Note: These springs will only fit the KLX140L. They are not for use in the standard KLX140. BBR 650-KLX-1405 0.41KG heavy duty fork springs.

Fixing with magnets and rubber bands, which allows quick removal of the protections from the swingarm in a few seconds, whenever you want to wash and / or maintain the swingarm. High-strength plastic swingarm protection.

Kits include fork leg and slider bushings along with any needed snap rings, o-rings and copper washers. ABOUT THE PART.

Fixing with magnets and rubber bands, which allows quick removal of the protections from the swingarm in a few seconds, whenever you want to wash and / or maintain the swingarm. High-strength plastic swingarm protection.

Pivot Works PWFFK-H17-000 Fork Seal/Bushing Kit. 2018-2025 Honda CRF250R. 2024-2025 Honda CRF250RWE. 2018-2025 Honda CRF250RX. 2017-2025 Honda CRF450R. 2021-2025 Honda CRF450RL. 2019-2025 Honda CRF450RWE.

Compact solution to maximize stroke and minimize shock absorber length. Easy to install. Simplified air bleeding. New rebound mating plate with proprietary design included in all kits. All-new rebound bumper and mating plate provide smoother kick back and longer service life.

They are made with a great stiffness to mass ratio and after you set your sag you'll be happy you got yourself a Race Tech Rear Shock Spring. Outstanding stiffness-to-mass ratio. Shot-peened, heat-treated and preset (no sacking).

Showa 45mm fork. FITS: Models with 45mm Showa Forks. - Motion Pro Ringer driver -. -Motion Pro Fork Seal Bullet Tool -. SKF Combo Kit. - Fork & dust seals -. Ringer Fork Seal Driver, 45mm. Fork Seal Bullet, 45mm - Yellow.

Part #: All Balls

Kawasaki KLX450R 08-09. Kawasaki KX450SR 22. Kawasaki KX125 92-05. Kawasaki KX250 92-07. Kawasaki KX250F 04-22. Kawasaki KX250X 21-22. Kawasaki KX450F 06-22. Kawasaki KX450X 21-22.

Race Tech SRSP 6023P55. Part #: SRSP 602355

The NEW SKF GLIDE KIT for WP 48mm AER forks is compatible with all WP AER 48 mm model years, either with those previous to 2021 as well as those newer (2021 onwards). WP 48 AER fork rebuild kit for. 2017-2020 Husqvarna TC FC & KTM SX SXF.

Steering Stabilizer for 1-1/8" Handlebars. Handlebar positions are counted from the closest to the rider #1 out. Parabolic steering stabilizer KTM / Husqvarna. KTM XC-Ws, XCF-Ws, EXCs, EXC-Fs & Husqvarna FEs, TEs.

BBR heavy duty fork springs & shock spring combo kit. 2004-2020 Kawasaki KLX110. Custom-developed by BBR for adult riders. Pre-set and stress relieved for long life. BBR Spring Rate: 0.62 kg. OEM Spring Rate: 0.48 kg.

Custom developed by BBR for adult backyard racers and aggressive mini riders. Custom wound from aircraft quality spring steel. ABOUT THE PART.

Custom-developed by BBR for adult riders. OEM Spring Rate: 14-29 lbs progressive. / BBR Spring Rate.55 kg. Custom developed by BBR Motorsports for the ultimate upgrade for mini four-strokes. Sized perfectly for fast/aggressive adult mini riders.

KTM sub mount will not fit but clamp is compatible with Scott's Sub-Mount Steering Dampener Kit for 100mm Span. This Ride Eng. top clamp have been designed to insulate the handlebars from vibration and reduce hand fatigue.