Browse Parts

Removed from a 1985 YTZ250 Tri-Z - Engine # 38W-008091. Good Used OEM magneto and stator. Good wiring and insulative rubber. Good plug & connector. Good coil.

Removed from a 1988 Banshee. Good usable OEM Magneto. No cracks. Good threads. Good strong pull.

The OD of the front outer lip is +/- 45.20mm. The OD of the rear is +/- 35mm. No dents or defects. Minor storage blemishes. Great for a restoration project. Year is unknown. Condition - New.

Removed from a 1991 CR125. The fork is specific to 1991 125/250/500. The pivot fits other models including the 1991. Good used OEM Rear Linkage. Good mount holes. Good bolts, good threads. Actuates nicely.

Removed from a 1994 GL1500SE Goldwing SE. Good, used OEM Front Left Brake Caliper. Tested good and fully functional. Minor wear to pads. Minor surface blemishes.

Nice OEM header. Nice heat shield.

Removed from a 2000 Suzuki DR650SE. Good used OEM Front Fender. Two extra holes drilled in the top. Good mount holes. Moderate scratches.

Welds all look good. Lower front mount slightly bent.

1980-1982 Kawasaki KDX175 KDX 175 Gas Fuel Tank Clarke & Cap Petcock. Removed from a running 1981 KDX175 - VIN # DX175A-005147 Engine # DX175AE-005247. Good used, Clarke Tank Assembly. Minor surface blemishes.

Good OEM Rear Wheel. Stamped 5EB. 1999 2000 2001 2002 Yamaha YZFR6 YZF R6 600 OEM Rear Wheel Rim 5EB-25338-00-33.

Removed from a 93 Suzuki DR250SE (S Model). OEM Cluster. Back of housing cracked. Ignition housing broken. Screw hole near ignition housing cracked. Good wires. Good plug. Good connector.

Removed from a 1983 125MX. Rim stamped - Sun T-1600 21 // 771002. B // Date 10 81. 36 spoked rim. Minor wobble to rim. Couple minor to moderate flat spots. Spoke nipples do not move and we need to be soaked.

Good OEM Cylinder. Good mounts and threaded studs. No scratches to wall. Good gasket surfaces.

Removed from a good running 1985 ATC 70 - Engine # TB03E-3029922. Good OEM bottom end. Ready for install. Good rod and rod bearing. Crank spins smoothly. Shifts well. Good threads. Minor wear.

1985 1986 Yamaha YTZ250 YTZ 250 Tri-Z OEM Cylinder & Piston 38W-11311-01-00. Removed from a 1985 YTZ250 Tri-Z - Engine # 38W-008091. Good Used OEM Cylinder & Piston. Minor wear/stains to cylinder walls, no scaring.

Fits several models and years. Date stamped 12/86. Nice OEM Rear Wheel. One Wheel. No cracks or bent edges. A few scars. Good valve stem. Good mounting holes for studs.

No dents or defects. Minor scratches from storage. Enhanced performance with great sound. No baffle. Condition - New.

Removed from a running 1997 360SX - VIN # VBKMXL204VM503413 Engine # 7-547 02704 . Good core, OEM Front Forks. 50mm inner tubes. Evidence of leaking seals. Tested but are springy, may be low on fluid.

Removed from a 1997 Yamaha YZ250. Good used Takasago Excel Front & Rear Wheels. Good OEM hubs. No cracks at all- or dents. Slight wobble to rims. Fair 50T Renthal sprocket. Good discs. Good spokes.

Nice OEM Cylinder Head. Stamped 1LX. Good mount holes and gasket surface. Good hose inlet. Very Usable. We try our best to answer all.

Removed from a 1992 KX125. Nice OEM Swingarm. Good buffer. Good threads, mount holes and brackets.

1993-2001 Yamaha YZ80 YZ 80 Rear Brake Caliper Master Cylinder 4ES-2580W-00-00. Removed from a 1996 YZ80. OEM Rear Brake Assembly for parts. No evidence of leaking. Line and connections in good condition.