Browse Parts

Fully race ported and reshaped. Look at the difference between the Edelbrock manifold and my Race ported manifold in the pictured provided. The Edelbrock cannot c ompare! The Edelbrocks runners are much smaller and flow less.

Vane Quantity: 3-vane Fittings Included: Yes Fitting Size 1: -12 AN Bracket Included: Yes Mounting Hardware Included: Yes Pump Material: Billet aluminum Pump Finish: Natural Quantity: Sold individually.

VACUUM PUMP RELIEF VALVE. VACUUM BREATHER TANK. 5 FT OF BLACK BRAIDED -12 AN HOSE. (3) STRAIGHT # 12 AN HOSE ENDS. (1) 90 DEGREE SWIVEL -12 AN HOSE END.

Pushrod - 6.650 in Long - 5/16 in Diameter - 0.080 in Thick Wall - Swedged Ends - Chromoly - Set of 16 The Manley Performance Products 5/16 Moly Pushrods are high-quality, performance parts designed for engines. With a length of 6.650 inches and a manufacturer part number of 25665-16, these pushrods are perfect for enhancing the performance of your vehicle. Made by Manley Performance Products, a trusted brand in auto performance parts, these pushrods come with a warranty for added peace of mind. Upgrade your engine with these durable and efficient pushrods for improved performance and reliability.

This is in great shape. Look at the pictures and you decide. READ THIS BEFORE YOU BUY. We do not cancel orders. <="" p="" face="Arial Black">. Alaska and Hawaii usually cost about double. International is even more yet.

THESE ALUMINUM ROCKERS ARE DESIGNED TO FIT ALUMINUM HEADS OR CAST IRON HEADS DRILLED OUT TO ACCEPT 7/16 STUDS. THESE ROCKERS CAN TAKE FROM 450 LIFT TO UP TO 750 LIFT. THEY ARE ALSO ALREADY CLEARENCED FOR LARGER SPRINGS AND 3/8 PUSHRODS WITH CAMSHAFTS THAT HAVE LARGED LIFTS.

6.6L(400) V8. 6.6L(403) V8. 7.0L(425) V8. 5.7L(350) V8. 7.5L(455) V8. CUSTOM CRUISER.

~Autotech was the first to incorporate plasma DLC coating on HPFP components to reduce friction losses and increase performance. Others have tried to follow by adding a coating to their parts. The success we have in the field can attest to that.

Solid roller and hydraulic roller cams are made from steel cores rather than cast iron for hydraulic flat tappet cams. The traditional fix for this was to run a sacrificial bronze gear which failed in short order.

SBC CHEVY VACUUM PUMP 1/2 kit AEROSPACE KIT. Condition is New.

R oller cams are made from steel cores rather than cast iron for hydraulic flat tappet cams. The traditional fix for this was to run a sacrificial bronze gear which failed in short order. There is no comparison.

Skunk2 Intake : 307-05-0280. - Thermal Intake Manifold Gasket. Free Thermal Intake and Throttle Body Gaskets included! 1990-2001 Acura Integra RS/LS/GS (non-VTC). - Thermal Throttle Body Gasket.

Vane Quantity: 3-vane Fittings Included: Yes Fitting Size 1: -12 AN Bracket Included: Yes Mounting Hardware Included: Yes Pump Material: Billet aluminum Pump Finish: Natural Quantity: Sold individually.

Designed to be installed in-line in a hydraulic brake line system to enable locking of the front or rear brakes. With the brake pedal depressed turning the handle locks the pressure in the system (locking the brakes).

Paradigm Engineering's High Flow Turbo Inlet pipe is now available for the Toyota Supra A90/A91, BMW G2X M240I/M340I/M440I, and G29 Z4 M40i (B58TU/C 3.0L turbo engines). APPLICATIONS (Gen 2 B58TU Powered BMW only).

The ultimate distributor/oil pump drive gear/shaft assembly for the Big Block or Small Block Mopar V-8. There is no comparison. Includes bushing. Small Block Assy fits 273, 318, 340, 360 CID. Big Block Assy fits 383, 400, 413, 426, 440 CID Plus 2nd Gen Hemi variants.

EMPI#18-1102-0. MALE 1/8"NPT TO FEMALE 10MM x 1.0 BUBBLE FLARE. UNIVERSAL PART x2. CONVERSION BRAKE LINE FITTING. LOCAL PICK UP.

· AN-6 (JIC -6) adapters inBlack. AN -6 Facet Works Red Top Fuel Pump. · Red Top competition fuel pump. Red Top competition fuel pump Specification;. Type: Fuel pump. Integrated 74 micron fuel filter.

KRC Pro Series III Power Steering Pump (as shown in pictures).

& 8 MM HTD Pulley & Stainless Steel Hoses. Recycling one ton of cardboard saves over 9 cubic yards of landfill space. Alaska and Hawaii usually cost about double. International is even more yet.

VERY EXPENSIVE HIGH QUALITY PUMP WHEN NEW. THE SHAFT IS STANDARD AUTO VERDI SIZE OF. 590". INCLUDES A 5mm PITCH 58 TOOTH PULLEY WITH COLLET STYLE HUB. THIS IS THE HALF COLLET VERSION WHERE THE TAPER IS BUILT INTO THE PULLEY AND ONLY HALF OF THE AUTO VERDI COLLECT SYSTEM IS USED AS SHOWN IN THE PICTURES.

Includes(1) Mishimoto Thermostat. Feature 1Fits the 2010-2014 Hyundai Genesis Coupe 3.8. Note: V6 Applications Only. Checkout Now! Liquid Chill. Chassis Components. Engine Codes: N/A. Chassis Codes: N/A.

This is a new item never installed. Ready to use.