Results for “GMC TRUCK”

DESCRIPTION --For 1966-1987 Chevy/GMC SBC 265-350Ci, Pickup Truck/Blazer/Jimmy 2/4WD (except 1970 Chevrolet corvette, 1977 Chevrolet K10, 1984 Chevrolet C20) --Material: Stainless Steel --Finish: Polished --Color: Silver --Placement On Vehicle: Front --Tube Diameter: 1 1/2" --Collector Size: 3" --Installation: Bolt-on --CNC machine flanges with TIG and MIG welded construction. --The surface is polished to avoid rust. --Fitment: Chevy 283-400 Engines: 64-74 Chevrolet El Camino 64-74 Chevrolet Malibu 65-74 Chevrolet Impala 65-74 Chevrolet Bel Air 65-74 Chevrolet Capri 67-69 Chevrolet Camaro 64-74 Ch.

Upgrade yourclassic Chevy or GMC truck with these high-performance stainless steel long tube headers designed forSmall Block V8 engines (305 / 327 / 350) from1966–1991. 🔥 Stainless Steel Long Tube Exhaust Headers 🔥.

NOTE: This header is equipped with a fitting to accept an oxygen sensor. Header Type Long Tube / Full Length. Full length design for power gain from mid to high RPM range. Flanges flattened by hydraulic press for precise and leak-free seal.

Long Tube Header & Y-Pipe for GM800 99-06 LS Vortec 4.8 5.3 6.0 Resistant Coated. 4.8L Vortec 4800 5.3L Vortec 5300 6.0L Vortec 6000 Header Inlet Size: 1.75"（1 3/4“）. Header Outlet Size: 3". For Silverado Sierra Truck 1 3/4 Long Tube Headers Y-Pipe 99-06 4.8L 5.3L 6.0L.

GM NEW OEM EXHAUST MANIFOLD. New OEM exhaust manifold. Manufactured to exacting standards. GMC,CHEVROLET 1500,2500 PICKUP 1996-2000. Application: BOTH SIDES (1725R) (1726L).

Fit for Chevy, GMC coated headers. Premium Quality 201 Stainless Steel. Only Applicable for Original Engines, Not for 4WD/AWD vehicles. TIG Welded CNC Machine Flange.

1968-87 Chevy/GMC Truck 396-454 Big Block Long Tube Header. Ceramic Coated Finish. Tube Size 1.75". Includes gaskets and Hardware. Collector Size 3".

Description: 100% Brand New,never been use Outlet Size: 2" Head Flange Thickness: 7/16" Outlet Flange Thickness: 3/8" Header features 8-2 light weight design. CNC machine flanges with TIG and MIG welded construction. Engineered and Tested to Exceed Original Equipment Standards and Performance Professional Installation is Highly Recommended (No Instruction Included). Package includes: 1 Set Of Exhaust Headers with Gaskets and bolts. Just as pictures show Fitment: .

25131438 (Replaced by GM SKU: 88968527). Original GM 25131438 Catalytic Converter Assembly. Chevrolet & GMC C1500, C2500, C3500. Chevrolet & GMC K1500, K2500, K3500. Chevrolet Suburban / Tahoe / GMC Yukon.

Flowmaster Super 44 (9430452) single 3" ID inlet with a dual 2.5" ID outlet. The Super 44s are the most aggressive, deepest sounding, highest performing 4 in. Their maximum performance and improved flow path will generate more torque and power than ever before!

Notes 4: Mandrel Bent for faster flow. Muffler: Three Chamber. Muffler Type: Flow Sound - 8D25D25-17. Notes 6: May need to extend pipes in front of muffler. Inlet: Muffler Inlet: Dual 2.5" ID. Make: Chevrolet / GMC.

High Performance Flowmaster Super 44 muffler (9430452) w/ a Single 3" inlet / Dual 2.5" outlet. This Dual Exhaust features a 2.5" Mandrel bent pipe that will improve the exhaust flow and give you the tone and reduced back pressure that you normally only get from much more expensive systems.

Notes 4: Mandrel Bent for faster flow. Muffler Type: Flowmaster Original 40 - 425404. Make: Chevrolet / GMC. Inlet: Muffler Inlet: Dual 2.5" ID. The item page will indicate which service is used for that specific item.

For C-10 LS Chevy GMC LS1, LS2, LS3 Shorty Engine. 1 X Set of Header Exhaust System, Gasket(s) and Bolt(s) as shown in the Picture Show. If not otherwise stated, all products carry a 12-month warranty against failure due to factory defects.

For 75-86 Chevy C20. For 67-74 Chevy C20 Pickup. For 73-86 Chevy C20 Suburban. For 75-86 Chevy K10. For 75-86 Chevy K20. For 75-86 Chevy C10. For 67-74 Chevy K10 Pickup. For 67-74 Chevy K20 Pickup.

This kit is for your OEM to higher horsepower set ups. The 2.5" pipes are aluminized to increase the life and mandrel bent which is sure to increase exhaust flow, change the exhaust note, and boost performance! Finally get that sound you have been searching for! The exhaust pipes exit directly out of the rear of the car. *Product disclaimer: THIS IS NOT A COMPLETE "DO IT YOURSELF" kit. This can be installed with basic tools. It is recommended that this kit be installed by a professional. Fabrication WILL be required. Any type of suspension or wheel/tire modifications may affect system clearances. Additional parts or fabrication will likely be required. This kit is intended for custom purposes. This kit does not interfere with any emissions control devices nor can it be used to do such. .

All Wheel Bases. 6 or 8 cyl. Our Kits will convert your single exhaust system to a dual exhaust system with a Performance muffler that will give your truck the look, sound and performance you have been searching for!

This kit is for your OEM to higher horsepower set ups. The 2.5" pipes are aluminized to increase the life and mandrel bent which is sure to increase exhaust flow, change the exhaust note, and boost performance! Finally get that sound you have been searching for! The exhaust pipes exit directly out of the rear of the car. *Product disclaimer: THIS IS NOT A COMPLETE "DO IT YOURSELF" kit. This can be installed with basic tools. It is recommended that this kit be installed by a professional. Fabrication WILL be required. Any type of suspension or wheel/tire modifications may affect system clearances. Additional parts or fabrication will likely be required. This kit is intended for custom purposes. This kit does not interfere with any emissions control devices nor can it be used to do such. .

Notes 4: Mandrel Bent for faster flow. Make: Chevrolet / GMC. Type: Tail Pipe Kit. The item page will indicate which service is used for that specific item. Inlet: 2.5" OD. Wheelbases: Fits 117.5" / 131.5" / 141.5".

Customize your truck with this Dual Exhaust Tail Pipe kit! They are designed to clear the OEM-installed receiver hitch and OEM-sized spare tire. Our system is designed to fit all wheel-base applications.

Customize your truck with this Dual Exhaust Tail Pipe kit! They are designed to clear the OEM-installed receiver hitch and OEM-sized spare tire. Our system is designed to fit all wheel-base applications.

Outlet: 2.5" Mandrel Bent Tailpipes. Muffler Type: Three Chamber. Notes 4: Mandrel Bent for faster flow. Muffler: FlowSound - 8D25D2517. The factory muffler is dual 3" inlet, this system uses dual 2.5" inlets.

FlowTech Headers for Chevy 283/302/305/307/327/350/400. Stainless Exhaust Headers Fit SBC CHEVY/GMC TRUCK87-91 C10 C20 K10 K20 305 327. SBC Small Block Chevy 55-79 283 327 350 V8 Full Engine REBUILD Gasket Kit.

New, ordered for a 2013 gmc sierra 1500, ended up not installing it, just been sitting in my garage for about a year, tips and clamps not included