Browse Parts

Upgrade your exhaust system with this 3” stainless steel dual exhaust X-pipe, designed to improve exhaust flow, balance, and sound quality. • Polished stainless steel construction. This 3” dual X-pipe is commonly used in custom or performance exhaust systems for vehicles including, but not limited to.

2.5" ID to 3.5"OD Carbon Fiber Burnt Exhaust Tail Pipe Tip Stainless Clamp-on US Fit for: Compatible with vehicles featuring a 2.5-inch outlet diameter exhaust pipe. NOTE: Ensure your tailpipe outer diameter is 2.5" before purchase!!! Specifications: Product Material: 304 Stainless Steel Product Color: Carbon Fiber Inlet Diameter: 2.5 in Outlet Diameter: 3.5 in Total Length: 6.5 in Packaging Weight: 480 g Packaging Sizes (cm): 17.5 x 11 x 9 Features: *Simple Installation .

2.5" ID to 3.5"OD Carbon Fiber Burnt Exhaust Tail Pipe Tip Stainless Clamp-on US Fit for: Compatible with vehicles featuring a 2.5-inch outlet diameter exhaust pipe. NOTE: Ensure your tailpipe outer diameter is 2.5" before purchase!!! Specifications: Product Material: 304 Stainless Steel Product Color: Carbon Fiber Inlet Diameter: 2.5 in Outlet Diameter: 3.5 in Total Length: 6.5 in Packaging Weight: 480 g Packaging Sizes (cm): 17.5 x 11 x 9 Features: *Simple Installation .

This Muffler Tip Can Not Only Reduce Exhaust Noise, Also Can Release The Exhaust Gas Safely and Effectively. The distance between the tail pipe and the bumper should be above 2cm to avoid scalding by hot exhaust bumper.

AP Exhaust 28940 Exhaust Pipe Replacement For 2016-2019 Ford Explorer

SPECIFIC PART NOTES : EGR COOLER ,EIW SFP051926 SSL062526. For sale is a eger cooler removed from a 2024 EXPLORER with 2189 Miles (VIN# 1FMSK7DHXRGA69368 / STK# 0550R). Specific notes about the condition and options are found below.

ProductGenuine GM Muffler 26617689. Cancellation Policy. We cannot take back installed or tried parts. We cannot take back used parts. In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.

got from parts car, needed exhaust so I buy exhaust, and had to change ends from it so this is whats left from it (had 21 rdx and it had circle tips, while these have square and got exhaust for 23+, so had to weld back the circle ones, and these are whats left.

Space-saving elbow design for custom routing around obstacles. The versatile design fits a variety of vehicles, making it an ideal choice for anyone looking to improve their exhaust setup. Compatible with cars, trucks, SUVs, and diesel vehicles.

1979-2004 Ford Mustang. Flow Tubes for 2 1/2" Exhaust.

Item is used, but it good working condition. Would Recommend stud replacements, but can be bolted on as is

Specific notes about the condition and options are found below. SPECIFIC PART NOTES : FRONT EXHAUST DOWNPIPE, EIV JWP060426 SSL062626. Interchanges With.

We are an authorized dealer for ISR Performance. The compatibility section is not always 100% accurate. The color, quantity, size, etc. may not be accurate. Part Number IS-GT-IS300-1G.

This Muffler Tip Can Not Only Reduce Exhaust Noise, Also Can Release The Exhaust Gas Safely and Effectively. The distance between the tail pipe and the bumper should be above 2cm to avoid scalding by hot exhaust bumper.

This Muffler Tip Can Not Only Reduce Exhaust Noise, Also Can Release The Exhaust Gas Safely and Effectively. The distance between the tail pipe and the bumper should be above 2cm to avoid scalding by hot exhaust bumper.

This Muffler Tip Can Not Only Reduce Exhaust Noise, Also Can Release The Exhaust Gas Safely and Effectively. The distance between the tail pipe and the bumper should be above 2cm to avoid scalding by hot exhaust bumper.

2.375" ID (Inside Diameter - slips OVER 2.375" tubing) to 3" ID (Inside Diameter - slips OVER 3" tubing) Reducer 304 Stainless Steel Exhaust Tube Adapter Connector This exhaust pipe adapter is made from 16 gauge 304 stainless steel. It has a 4" overall length with a brushed polish finish. This is NOT slotted and is intended to be a weld on installation. If the end user would like to use clamps instead of welding, it is recommended to cut slots for clamping. Made in Phoenix Arizona. Please send us a message if you would like custom lengths and sizes.

For 2005-2016 Porsche 911 997 Carrera 997.1 997.2.

Stainless Steel Slanted SUV Resonated Tip Exhaust 2.5" In 4" Out 12" Long.

ANSA ME1109 230SL Exhaust Tip.

For sale is a down pipe removed from a 2025 PALISADE with 15608 Miles (VIN# KM8R54GE8SU809383 / STK# 0292T). Specific notes about the condition and options are found below. 20-25 Palisade. SPECIFIC PART NOTES : EXHAUST CROSSOVER PIPE ,EIV SFP052726 SSL062626.

Lightweight carbon fiber shell over a T304 stainless steel inner structure. Combines strength, heat resistance, and a sporty appearance. Easy Installation - Clamp-on design. Slide on, align, and tighten the included black clamp with a common wrench for a secure fit

Dual Pipe Exhaust Tail Pipe Tip 2.5'' Inlet Clamp / Weld-on Black Muffler Tips Fit for: Fit pipes with 2.5 inch outer diameter Note: Please measure your own pipe and bumper cutout, and compare to this product fitment size. Specifications: Product Material: Stainless Steel Product Color: Black Inlet Diameter: 2.5'' Outlet Diameter: 7'' Length: 8.5'' Packaging Weight: 829 g Packaging Dimensions (cm): 28 x 18.5 x 13 Features: *Simple Installation .

Genuine Mopar Parts. EXHAUST FRONT. Cancellation Policy. We cannot take back installed or tried parts. We cannot take back used parts. In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.