Browse Parts

A Total of Ten Sets (10) Mil Spec Black Lift The Dot Fastener Sets. Includes 10 Sockets with Back Plates and 10 Studs with Back Plates.

New Heavy Duty A Belt Clutch. Fits most Honda GX160 GX200 engines. or equivalent with 20mm shaft up to 13 HP. We carry other size clutches if needed.

Our staff has over 65 years of combined experience in the Genuine Nissan Parts Market. Genuine Nissan Parts. It must be in new resalable condition. We are not responsible for installation errors. We are not responsible for any labor expenses, towing expenses, lodging expenses or rental car expenses that occur as the result of the installation of any wrong or defective parts.

This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.

This left / driver side a-arm is compatible with the following Yerf-Dog go kart models: 3002, 30033, 3200, 3202, 32001, 3203, 3203A, 30034, 30032, 3205, 3208 and 30012. It is referenced by the following part numbers: 01758, 01263, 01756, 04248 & 03068.

On Off Switch (Kill Switch). Plated and a real safety feature for all vehicles. Part Number: 400500.

Description: 100% brand new, Never been tried or installed Item number: 5959-203589 The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines. Also used on the Comet TAV2 bolt on torque-a-verter kit. Width: 0.75 inch, Length: 27 1/32 inch center to center spacing for the driver and driven pulley needs to be between 6 5/8 inch and 6 11/16 inch. No instruction included Package including: .

Predator 212cc (Both) Predator 224cc Engines. Fits Virtually ANY Chinese Built OHV Engines from 140cc thru 225cc. Exhaust Muffler. You receive the Muffler and New Exhaust Gasket.

Part Number: 02955. Fits Yerf-Dog Models: 3203, 3203A, 30034, 3002, 3205, 30032, 3208, and 30033. NOTICE: You need to verify the picture matches your spindle. Compatible with Yerf-dog go karts, but can be used on many other makes and models.

CAR: 1971 PLYMOUTH CUDA. MOPAR MUSCLE. COLOR: BLUE.

Description: 100% brand new, Never been tried or installed 3/4" x 30.25" Cogged Belt 3/4" top width 30 degree symmetric belt for Comet 20 Series Clutch System. Use with 6" driven with 8-3/16" to 8-1/4" center to center distance or 7" driven with 7-5/16" to 7-3/8" center to center distance. Comet number marked on belt is 884-85. Replaces Comet Part #s: 203581, 203581A, 203581B, & 203581C Other Part Number: 5310016-95 No installation included. Professional installation is highly recommended. Package Includes .

Part Number: 05303. Yerf Dog Swing arm. BMI Karts & Parts. Buy In Bulk.We have tons of parts available!

Part Number: 02954. Fits Yerf-Dog Models: 3203, 3203A, 30034, 3002, 3205, 30032, 3208, and 30033. Compatible with Yerf-dog go karts, but can be used on many other makes and models. NOTICE: You need to verify the picture matches your spindle.

Our staff has over 65 years of combined experience in the Genuine Nissan Parts Market. Genuine Nissan Parts. It must be in new resalable condition. We are not responsible for installation errors. We are not responsible for any labor expenses, towing expenses, lodging expenses or rental car expenses that occur as the result of the installation of any wrong or defective parts.

Our staff has over 65 years of combined experience in the Genuine Nissan Parts Market. Genuine Nissan Parts. It must be in new resalable condition. We are not responsible for installation errors. We are not responsible for any labor expenses, towing expenses, lodging expenses or rental car expenses that occur as the result of the installation of any wrong or defective parts.

Genuine Nissan Parts. Gordie Boucher Nissan. Car-D-Part and team are your official source for Genuine OEM Nissan parts and accessories. We cannot take back installed or tried parts. We cannot take back used parts.

This muffler was designed for AKRA / WKA / FKA. RLV "Mini 91" Muffler / Silencer for Clone. This is a RLV "Mini 91" Muffler / Silencer for Clone. Works with following exhaust pipes, part numbers 300568 or 300563 Thread: 1/2-14 NPT.

Longacre Quick Disconnect Steering Wheel Hub. Steering Wheel Quick Disconnect. Hex Hub - push button release. Aluminum hub. Welds to 3/4" or 5/8" steering shaft. Part Number: 52-56600.

This new carburetor adapter allows racers to use a GX390 carburetor on a GX200/BSP/Clone Engine. Important: Remove the OEM Black Plastic Insulator in order to use this adapter. One side of the adapter takes the 'D' shaped gasket and the other side takes the round gasket for the GX390 Carb (included).

Commonly used in GM vehicles and similar automotive panel designs. Panel thickness (grip range): 1/32"–1/16" (1–2 mm). Design: Push-in ribbed stem bumper. Rubber Feet. in automotive panels and trim.

COMPLETE SET! Perfect for go kart racing! Lightened racing front wheel hub. Rear Hub Specs Complete Set: Lightened Aluminum Wheel Front / Rear Hubs (1" Bore, 1/4" BOLTS). Billet aluminum construction 5/8" high speed wheel bearings pressed-in.

This right / passenger side a-arm is compatible with the following Yerf-Dog go kart models: 3002, 30033, 3200, 3202, 32001, 3203, 3203A, 30034, 30032, 3205, 3208 and 30012. It is referenced by the following part numbers: 01757, 01264, 01755, 04247, & 03091.

Mater ial: Black hard dry carbon fiber. Feature: Racing carbon fiber interior upgrade.

Genuine Nissan Parts. Murfreesboro Nissan Parts. Murfreesboro Nissan. We cannot take back installed or tried parts. We cannot take back used parts. In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.