Browse Parts

Rebuild kit for Wilwood Slave Cylinder. Contains o-ring seals, spring assembly, inlet fitting and bleed screw. All parts necessary for maintenance and repair of your slave cylinder. .

Wilwood's two, four and ten pound residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration, thereby causing excessive caliper piston retraction and a longer brake pedal stroke. The minimal two pound residual pressure prevents fluid from flowing back without causing the brakes to drag. Four pound valves can be beneficial in high vibration brake sytems such as off-road or dirt circle track racing. With drum brakes, a ten pound valve is used to compensate for return spring tension and maintain wheel cylinder sealing in the drums.

The new generation of adjustable proportioning valves combines the latest refinements to deliver precise pressure metering and strength from a compact forged billet design. Pressure adjustments range from 100-1000 PSI and provide for a maximum decrease of 57% in line pressure, the most of any available valve. Adjuster knob with fine thread tuning provides precise pressure adjustment. Valves weigh only 5.2 ounces and have two .25” side mounting holes spaced 1.00” apart. Inlet / outlet ports are 1/8-27 NPT and valves are supplied with two 1/8-27 NPT to 3/8-24 inverted flare female fittings that will fit most domestic 3/16th hard brake lines. .

Manufacturer: Wilwood.

Allstar Performance brake duct hose flange, 3in, for race car brake cooling. Connects hose for improved airflow in racing setups. Bolt-on installation for track use. Brake duct mounting flange has a 3 inch diameter for use with most brake ducting hose. The brake duct flange rivets to the nose piece and once installed, a 3 " diameter brake duct hose can then be hose clamped to the flange. Fit type: Vehicle Specific. Package Dimensions: 13.462 L x 7.62 H x 22.86 W (cm). .

1993-1998 Jeep ZJ Grand Cherokee. 1987-1995 Jeep YJ Wrangler. 1986-1992 Jeep MJ Comanche. 1997-2006 Jeep TJ Wrangler. 1984-2001 Jeep XJ Cherokee. Crown Automotive 52005477 Brake Dust Shield – Left front brake dust shield protects rotor from debris.

Fits: 2007-2018 Jeep JK Wrangler w/ 2-Door body style. Price is per one (1) Crown Automotive Parking Brake Cable, part number 52059891AF. Two (2) are required per vehicle - order multiples as needed.

Allstar Performance spindle duct, right-hand, dual, for race car brake cooling. Directs air to brakes for improved cooling in racing setups. Bolt-on installation for track use. Dual 3 in Tubes. Spindle Mount. Passenger Side. Aluminum. .

Each order includes one (1) Crown Automotive Front Parking Brake Cable, part number 52007048. Manufacturer: Crown Automotive. Front position. Use existing vehicle hardware for installation.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter bore for installation into hat or rotor. .

Manufacturer: Wilwood.

1987-1995 Jeep YJ Wrangler. 1986-1992 Jeep MJ Comanche. 1997-2006 Jeep TJ Wrangler. 1984-2001 Jeep XJ Cherokee. Manufacturer: Crown Automotive. 1982-1986 Jeep CJ-5/CJ-7/CJ-8 w/ power brakes. Use existing hardware.

Each order includes one (1) right rear parking brake cable. Right Rear Parking Brake Cable. Manufacturer: Crown Automotive. 1981-1983 Jeep CJ-5. 1981-1986 Jeep CJ-7. 1981-1986 Jeep CJ-8 Scrambler. Use Existing Hardware.

StopTech Street Select Brake Pads provide superior stopping power and reliability for passenger cars and light trucks. StopTech engineers have developed two application specific friction compounds; semi-metallic and ceramic that combine improved stopping performance while reducing noise and dust. StopTech Street Select Brake Pads are installation ready with High Performance shims attached to eliminate noise and vibration. OE style gas slots and chamfers optimize braking performance especially in repeat stop situations. Application specific hardware is included with each pad set ensuring full restoration of system performance and extended service life. 100% Shimmed to eliminate noise and vibration. 100% Positive Molded. 100% Scorched for improved bed-in. Linear response both cold and hot.

Manufacturer: Crown Automotive. Rear Left Position. For Models w/ 11" Brakes.

Wilwood's Dual Cylinder Inline Cutting Brake kits utilize a single inlet, twin outlet flow-through master cylinder to simplify plumbing of the existing calipers and deliver precise steering-brake control for all types of off-road competition vehicles. This unit features a weight-saving, all-aluminum design with a high-leverage forged lever arm and an ergonomic full-length hand grip. Twin 3/4" bore cylinders combine with the high leverage lever arm to create instant high-pressure with minimal operator effort. The one-piece cast body incorporates integral mounting lugs to make for easy and secure mounting. The entire assembly is e-coat finished to resist weathering and oxidation. .

Fits: 1994-1998 Jeep ZJ Grand Cherokee w/ Rear Disc Brakes. Does not fit TJ Unlimited (LJ) models. Each order includes one (1) Crown Automotive Left Rear Parking Brake Cable, part number 52008905. Manufacturer: Crown Automotive.

Wilwood Cap - Girling Master Cylinders Nylon Remote Reservoirs M/C w/ Vented Diaphragm .

StopTech Street Select Brake Pads provide superior stopping power and reliability for passenger cars and light trucks. StopTech engineers have developed two application specific friction compounds; semi-metallic and ceramic that combine improved stopping performance while reducing noise and dust. StopTech Street Select Brake Pads are installation ready with High Performance shims attached to eliminate noise and vibration. OE style gas slots and chamfers optimize braking performance especially in repeat stop situations. Application specific hardware is included with each pad set ensuring full restoration of system performance and extended service life. 100% Shimmed to eliminate noise and vibration. 100% Positive Molded. 100% Scorched for improved bed-in. Linear response both cold and hot.

Bracket kit for Wilwood’s Pro Street Rear Brake kits. Bracket assembly includes an additional lug mount caliper bracket with 5.25” mount centers for FDL Calipers. Optimized for 12.19” diameter rotors. Engineered from high strength aluminum alloy with 3/8-24 steel clinch nuts. .

Crown Automotive Part Number 68321343AB | Disc Brake Rotor Rear, Left or Right, 350mm, Direct Replacement Rear Brake Rotor for 21+ Jeep JL Wrangler w/ 392 Package & 20+ Jeep JT Gladiator Compatible with the following: 2021-2024 Jeep JL Wrangler w/ 392 Package, 2020-2024 Jeep JT Gladiator .

Allstar Performance brake duct teardrop, clear, double hole, for race car brake cooling. Directs air to brakes for improved cooling in racing setups. Bolt-on installation for track use. brake cooling duct has dual holes with a 3 inch o.d. Inlet. Constructed from heavy-duty clear plastic. Brake ducts are designed to direct outside air to brakes, oil coolers and the drive. Sold each. Backed by a 90-day limited factory warranty. .

Wilwood Quick Disconnect Kit -3 AN .

Wilwood Brakes Disc Brake Rotor Bolt | 230-0150.