5-Inch Dual Color LED RV Porch Lights (Pair)
Updated June 23, 2026
These 5-inch LED porch lights are designed for RVs, campers, trailers, and trucks, providing bright exterior illumination under awnings or at entry doors. The dual-color feature lets you switch between warm yellow (3000K) and cool white (6000K) to suit your mood or activity. With a rugged aluminum housing and IP67 waterproof rating, they withstand outdoor conditions. The pair delivers 45W total output (2000 lumens) and operates on 10-30V DC, making them compatible with most 12V RV electrical systems.
AI-generated content
Design and Construction
Each light measures 5 inches and features a black aluminum housing with a polycarbonate (PC) lens that resists impact and UV damage. The lens is anti-glare, reducing harsh glare while maintaining excellent light output. An integrated aluminum heat sink ensures efficient thermal management, prolonging LED life. The IP67 rating means the lights are dust-tight and can withstand temporary immersion in water, making them suitable for all-weather outdoor use.
Dual-Color Functionality and Compatibility
The lights offer two selectable color temperatures: cool white (6000K, 2000 lumens) for bright task lighting, and warm yellow/amber (3000K) for a softer, insect-friendly glow. Switching between colors is accomplished via a built-in toggle switch on the light housing or through wiring selection (refer to included instructions). The wide 10-30V DC input range ensures compatibility with 12V and 24V electrical systems found in RVs, campers, trailers, boats, and trucks.
Installation Notes
Installation is straightforward with the included mounting screws and brackets. The lights mount directly to a flat exterior surface using the screw-in design. Connect the wiring to your vehicle's 12V system, observing correct polarity (red positive, black negative). For dual-color operation, ensure the color-select wire is connected as per the manual. No special tools are required, and the entire process typically takes under 30 minutes for both lights.
Common Issues and Diagnosis
If a light fails to illuminate, first check the 12V power supply and ground connection. Flickering or dim output may indicate a loose wire or voltage drop. Water ingress, though rare with IP67 rating, can occur if the housing seal is damaged; inspect the gasket and lens for cracks. LED failure is uncommon but possible; if one color stops working while the other functions, the internal driver may be faulty. Test with a multimeter to confirm voltage at the light terminals.
