Results for “Honda”

Removed from a 1975 cb125s. I would suggest replacing seals or possibly bearings if the parts have them, if it’s obvious they are bad it will be noted. As these parts are removed from a 50 year old machine.

Removed from a 2001 Honda rancher 350 fe 4x4 es. I would suggest replacing seals or possibly bearings if the parts have them if it’s obvious they are bad it will be noted. As these parts are removed from a 20+ year old machine.

Removed from a 2001 Honda foreman rubicon 500 FA 4x4 es. We do our best to fully describe the condition of each used part listed. Shows normal signs of wear and use.

Removed from a 1965 honda super cub 50 c102. Starter does not work needs rebuilt.

Removed from a 1994 Honda cr80. I would suggest replacing seals or possibly bearings if the parts have them if it’s obvious they are bad it will be noted. As these parts are removed from an almost 30+ year old machine.

Removed from a 1975 cb125s. Held gas while on the bike it had fuel for a couple months. May need repairs in the future but I’m unsure. See photos. Has a small amount of surface rust inside tank. We do our best to fully describe the condition of each used part listed.

Removed from a 1965 honda super cub 50 c102. I would suggest replacing seals or possibly bearings if the parts have them, if it’s obvious they are bad it will be noted. As these parts are removed from a 60+ year old machine.

Removed from a 1975 cb125s. Pan is nice not rusted out cover is good has a couple small marks that may clean off. We do our best to fully describe the condition of each used part listed.

Removed from a 1993 Honda cr125. Match set of cases. We do our best to fully describe the condition of each used part listed.

Removed from a low hour, 2001 Honda rancher 350 fe 4x4 es. I would suggest replacing seals or possibly bearings if the parts have them if it’s obvious they are bad it will be noted. As these parts are removed from a 20+ year old machine.

Removed from a 1975 cb125s. Light surface rust spots on rim small scratches, no bends. We do our best to fully describe the condition of each used part listed.

Removed from a 2000 xr200r. Rim is missing a spoke, needs wheel bearings, has a small piece of the dust lip in the rim that is missing see photos. Has surface rust and corrosion inside rim. We do our best to fully describe the condition of each used part listed.

Good used condition Can appears to have minimal wear Removed from 05 crf450

Will need new fork seals. Removed from 1993 Honda gold wing 1500a.

Removed from a 1985 Honda cr250r. Good cases match set good threads no cracks. We do our best to fully describe the condition of each used part listed. Good used condition.

Removed from a low hour, 2001 Honda rancher 350 fe 4x4 es. Fan is wired to a switch. We do our best to fully describe the condition of each used part listed. Good used condition.

Removed from 1993 Honda gold wing 1500a. 2 cracks pictured. We do our best to fully describe the condition of each used part listed.

Removed from a 1995 Honda magna vf750cd. I would suggest replacing seals or possibly bearings if the parts have them, if it’s obvious they are bad it will be noted. As these parts are removed from a 30+ year old machine.

Removed from a 1987 honda elite ch150. I would suggest replacing seals or possibly bearings if the parts have them, if it’s obvious they are bad it will be noted. As these parts are removed from a 40 year old machine.

Removed from a 2011 Honda crf70. Top rubber fork seals have small cracks. We do our best to fully describe the condition of each used part listed.

Good used condition Has some surface corrosion Could use to be cleaned/polished Would suggest new valve stem due to age ***Due to size of item if you are shipping this item to a PO BOX, Puerto Rico, US Virgin Islands, American Samoa, Northern Mariana Islands, Guam, Alaska, Hawaii please contact me prior to purchase to see if additional shipping costs are required. thank you***

Used condition Shows signs of wear and use Removed from a 1975 cb125s We are a family-owned small business specializing in selling used and take off parts. Parts were used on road and or off-road and may need to be cleaned prior to use. They are used and may show some cosmetic blemishes, dirt, grease, etc, but will be in working order unless otherwise noted. We do our best to fully describe the condition of each used part listed. Thank you. Parts may fit other years please check part number or research the year and type of part for fitment. I would suggest replacing seals or possibly bearings if the parts have them, if it’s obvious they are bad it will be noted. As these parts are removed from a 50 year old machine.

Removed from 05 crf450 Basket and plates have some wear See photos

Removed from 1975 cb125s. Removed from a 1975 cb125s. 2 piece pipe. Exhaust has been modified but fits fine and bolts up, see photos. We do our best to fully describe the condition of each used part listed.