Browse Parts

The SFI 16.1 Harness has a 3" Pull Down Individual Roll Bar Mount Shoulder Harnesses that will bolt or wrap to the roll bar behind the seat. The 3" Lap Belts are Pull Down Lap to tighten and bolt in.

Added bonus, this item was made in the USA by good old Southern boys No Chinese parts sold here! FREE Trial ! (Sorry, state law).

NOTE: This kit is for the TOYOTA HOUSING center as there are a couple of brackets that require a different length than the US LEGENDS HOUSING with the fabricated center section.

Note: The kit for the US LEGEND HOUSING fabricated center as there are a couple of brackets that require a different length than the TOYOTA HOUSING with the Toyota Center Section. The US LEGENDS has a couple of brackets that require about a 1/4" longer bracket.

Used US legend car rear end housing was used as a spare just needs a few new studs.

The bolt and nut shown in picture 2 and 3 are being used to show how the product should be assembled for use on your race car. Our exclusive design captures the bearing on both sides so that unlike other designs, if you experience a bearing failure you can continue to race, and not loose the ability to shift.

Legend Swedged Aluminum Radius Rod. 1" OD x 1/2"-20 Thread x23 1/2" Long.

This Universal SFI 16.1 Harness has a 3" Wide Pull Down Individual Floor Mount Shoulder Harnesses that can Bolt into the floor or Bolt or Wrap to the roll bar running across just above the floor. The 3" Wide Lap Belts are Pull Down to tighten and can Bolt or Wrap in.

Used welded 358 rear gear in good condition was used as a spare. Comes as you see it!

Sorry, state law.

Pictures 1,2,3, and 4 show different views of the steel shift adapter assembly.

This fitting allows the addition of an oil pressure gauge to the crankcase of a Honda CB750 SOHC 69-76. Sorry, state law.

This product does mount to existing holes in the CB175 chassis. Picture number 3 thru 4 show the tank mounted on a CB175. This product could possibly be used in a variety of applications. However it is up to the purchasing party to decide if this product will work in another application than the CB175.

The thread pitch is M20x1.5 and accepts 1/4 pipe thread fittings and is shown in picture # 2 above in one area where it is commonly used on the crankcase. Added bonus, this item was made in the USA by good old Southern boys .

Sorry, state law.

(New) Inex front spindle base forged.

The MSRP on part # 36Y-16381-11-00 from the local Yamaha dealer is 289.99 new (if still available).

Picture number 3 shows the brake bottle kit mounted in a Legend Car as used. So be sure to check with your local tech inspector and make sure the product will pass HIS tech.

Size Extra Large, Color Black. These performance gloves are the total gauntlet style to go over your racing jacket cuffs. There is a Velcro outer strip for extra security. These gloves are constructed from the highest quality materials, which include a leather reinforced palm pad to reduce hand fatigue and grip points for the wheel without sacrificing the softness of the material and your comfort.

These performance gloves are the total gauntlet style to go over your racing jacket cuffs. There is a Velcro outer strip for extra security. These gloves are constructed from the highest quality materials, which include a leather reinforced palm pad to reduce hand fatigue and grip points for the wheel without sacrificing the softness of the material and your comfort.

Size Large, Color Black. These performance gloves are the total gauntlet style to go over your racing jacket cuffs. There is a Velcro outer strip for extra security. These gloves are constructed from the highest quality materials, which include a leather reinforced palm pad to reduce hand fatigue and grip points for the wheel without sacrificing the softness of the material and your comfort.

This slip yoke assembly is the "lightweight" version that was used on the very early Legends series cars. If you lose weight in the driveshaft it will allow reduced drag on your race cars drive train and less horsepower will be required to spin the shaft and turn the wheels.

Size 2X ( XXL) Color Black. These performance gloves are the total gauntlet style to go over your racing jacket cuffs. There is a Velcro outer strip for extra security. These gloves are constructed from the highest quality materials, which include a leather reinforced palm pad to reduce hand fatigue and grip points for the wheel without sacrificing the softness of the material and your comfort.