Browse Parts

A Total of Ten Sets (10) Mil Spec Black Lift The Dot Fastener Sets. Includes 10 Sockets with Back Plates and 10 Studs with Back Plates.

New Heavy Duty A Belt Clutch. Fits most Honda GX160 GX200 engines. or equivalent with 20mm shaft up to 13 HP. We carry other size clutches if needed.

This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.

Genuine Nissan Parts. FORT WORTH NISSAN PARTS. We cannot take back installed or tried parts. We cannot take back used parts. In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.

Privacy blockers are designed for the Model Y's. They also fit the Model 3 and Cybertruck. No need to worry about strikes while using your phone! Mounting hardware included.

Part Number: 02954. Fits Yerf-Dog Models: 3203, 3203A, 30034, 3002, 3205, 30032, 3208, and 30033. Compatible with Yerf-dog go karts, but can be used on many other makes and models. NOTICE: You need to verify the picture matches your spindle.

10" Steering Wheel. (3) 1/4" holes on a 1-5/8" bolt circle. One Piece Construction - No Welds. Part Number: 410200. Molded Finger Groves.

This left / driver side a-arm is compatible with the following Yerf-Dog go kart models: 3002, 30033, 3200, 3202, 32001, 3203, 3203A, 30034, 30032, 3205, 3208 and 30012. It is referenced by the following part numbers: 01758, 01263, 01756, 04248 & 03068.

On Off Switch (Kill Switch). Plated and a real safety feature for all vehicles. Part Number: 400500.

Thermodynamically designed clutch shoe increases the clutch's capacity to absorb heat without damaging the clutch springs, thereby providing a longer service life, even in the most demanding applications.

This is the "Generation 3" left front (driver-side) spindle for the GX150 Spiderbox Series of go kart from Yerf-Dog. Spindle for Spiderbox: Left Front for Offset A-Arms. Made for offset a-arms, where the holes are offset from each other (not even).

Description: 100% brand new, Never been tried or installed 3/4" x 30.25" Cogged Belt 3/4" top width 30 degree symmetric belt for Comet 20 Series Clutch System. Use with 6" driven with 8-3/16" to 8-1/4" center to center distance or 7" driven with 7-5/16" to 7-3/8" center to center distance. Comet number marked on belt is 884-85. Replaces Comet Part #s: 203581, 203581A, 203581B, & 203581C Other Part Number: 5310016-95 No installation included. Professional installation is highly recommended. Package Includes .

The flexible stem compresses into a 9/32" opening. Hole Plugs. Design: Blind panel plug / hole plug. Tubing Plugs. Each order includes 25 plugs. Save when ordering multiple units. while the flat head sits flush for a clean, finished panel surface.

Genuine Nissan Parts. FORT WORTH NISSAN PARTS. Cancellation Policy. We cannot take back installed or tried parts. We cannot take back used parts. In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.

Description: Centrifugal clutch 3/4" bore 12 tooth design. A high quality and professional clutch. High impact,wear resistant that is super durable. Commonly used on go karts, mini bikes, Replace the old broken clutch. User-friendly controls for easy starting and operation 100% Brand new, Never been used. Shaft Bore: 3/4" Shaft and 3/16" Key way Accommodates: #35 Chain Tooth: 12 Professional Installation is Highly Recommended No Instruction Included Package Includes: .

Genuine Nissan Parts. FORT WORTH NISSAN PARTS. Cancellation Policy. We cannot take back installed or tried parts. We cannot take back used parts. In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.

Description: 100% brand new, Never been tried or installed Item number: 5959-203589 The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines. Also used on the Comet TAV2 bolt on torque-a-verter kit. Width: 0.75 inch, Length: 27 1/32 inch center to center spacing for the driver and driven pulley needs to be between 6 5/8 inch and 6 11/16 inch. No instruction included Package including: .

CAR: 1971 PLYMOUTH CUDA. MOPAR MUSCLE. COLOR: BLUE.

On Off Switch (Kill Switch) for Honda & Clone Engines. This on/off engine switch is compatible with generators imported from Jiang Dong, Ltd. in China. Also reference as part number JF168.10-1. Part Number: JD4000.1-1.

This is the "Generation 3" right front (passenger-side) spindle for the GX150 Spiderbox Series of go kart from Yerf-Dog. Spindle for Spiderbox: Right Front for Even A-Arms. Yerf Dog's newest version.

Steering wheel hub to fit on our steering shafts. Steering Wheel Hub. (3) 1/4" holes on a 1-5/8" bolt circle &. (3) 1/4" holes on a 1-1/2" bolt circle. 36 Splines with 2 bolt patterns Part Number: 660006.

This is a seat cover designed to fit the bucket seats on the GX150 Spiderbox series of go karts from Yerf-Dog. Seat Cover for Yerf-Dog Spiderbox. Part Number: 06245.

Genuine Nissan Parts. FORT WORTH NISSAN PARTS. Cancellation Policy. We cannot take back installed or tried parts. We cannot take back used parts. In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.

Genuine Nissan Parts. FORT WORTH NISSAN PARTS. Cancellation Policy. We cannot take back installed or tried parts. We cannot take back used parts. In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.