FITS RENAULT MEGANE 95+ H1 CONVERSION Kit Car LED Headlight FOG Bulbs WHITE

FITS RENAULT MEGANE 95+ H1 CONVERSION Kit Car LED Headlight FOG Bulbs WHITE

This product data sheet is originally written in English.

Compatible With:

H1

Input Power:

L/36W, H/36W

Luminous Flux:

L/3800LM, R/3800LM

Voltage:

DC 8-48V

IP Rate:

IP65

Light source model:

2 sided CSP/ COB chips

Beam Angle:

360 Degrees

Heat Control

Aluminum shell base including Turbo cool fan

Aviation aluminum 6063

Smart Efficient Cooling System, Built-In Cooling Fans For Fast Heat Dissipation

Operating Temperature:

-40 - +80°C

The heating temperature is low- this will protect your car

(Xenon working temperature up to 800 ° -1000 °,the main reason for the car ignition)

Sealed Housing:

Dustproof and Waterproof

Colour Temperature:

6500K

Longlasting operating Life:

>30000hrs

Number of Bulbs

2

To Fit:

Head Lights Kit,Fog lights

Placement on Vehicle:

Front Left, Front Right

Product Manual with fitting instructions

included

INSTALLATION :

For video search YouTube for tittle below :

Led Headlight Conversion Kit Review And Installation

Unplug the plastic wiring connector from the factory-installed bulbs and remove them

Preserve them in a safe space for possible future use

Remove the rubber Dust Boot/ back cover

Release the retaining the metal spring and remove the halogen bulb

Remove the plastic black ring shown on the photo from LED lamp (twist and pull up) and FIRST INSTALL just the plastic ring and lock it in with the retaining metal spring

Put the rubber boot /cover back.

When the ring is secured you can push through the LED lamp and twist so it stays it place

Led Headlight Conversion Kit Review And Installation - YouTube

Video will open in a new window

Using the eBay App? Paste link into a browser window:

[isdntekvideo]

Brightness enhance up to 200%,6500k pure white,

Non-destructive and quick installation, clearer beam pattern without dazzling

100% Integrated Design, Plug and Play.

Few vehicles may require load resistors to stop flickering or fix the error message. It's not the quality problem, in such case you will need to install the decoder to avoid the error code or blinking.

Smart Efficient Cooling System, Built-In Cooling Fans For Fast Heat Dissipation (Xenon working temperature up to 800 ° -1000 °,the main reason for the car ignition) Unplug the plastic wiring connector from the factory-installed bulbs and remove them

Release the retaining the metal spring and remove the halogen bulb

Remove the plastic black ring shown on the photo from LED lamp (twist and pull up) and FIRST INSTALL just the plastic ring and lock it in with the retaining metal spring When the ring is secured you can push through the LED lamp and twist so it stays it place

Non-destructive and quick installation, clearer beam pattern without dazzling

Few vehicles may require load resistors to stop flickering or fix the error message. It's not the quality problem, in such case you will n