Fits Kia Sportage 2010-2017 2.0L 2.4L 2.7L Power Window Switch Front Left Driver

• Product Description

•

•

· Direct replacement - This power window switch fits, functions and matches the appearance of the original switch for a perfect replacement every time

•

· Quality construction - manufactured from premium materials for a long service life

•

· Excellent value - original equipment quality at a lower price

•

· Quality tested - has undergone simulation and endurance testing to ensure proper fit and performance

•

•

How to Install a Power Window Switch

•

Coils-autoparts

Fits Kia Sportage 2010-2017 2.0L 2.4L 2.7L Power Window Switch Front Left Driver

Product Description

· Direct replacement - This power window switch fits, functions and matches the appearance of the original switch for a perfect replacement every time

· Quality construction - manufactured from premium materials for a long service life

· Excellent value - original equipment quality at a lower price

· Quality tested - has undergone simulation and endurance testing to ensure proper fit and performance

How to Install a Power Window Switch

Step 1 - Pry off Bezel

Using a flat head screwdriver you can pry up the bezel that the switch is in. You do not have to remove the door casing or the handle of the door. You simply pry gently on the power window switch bezel to get at the housing.

Step 2 - Remove from Bezel

Once the bezel comes loose, you will notice some tabs that hold it into place. Press down on the locking tab and it will come loose. Hold up the switch and bezel and look for some tabs that hold the switch to the bezel itself. Pry these with a little pressure from the screwdriver and pop the switch from the bezel.

Step 3 - Remove Rockers from Switch

Once you have the power window switch out of the bezel, remove it from the outlet. This is simply disconnecting it from the wire harness. Remove the rockers from the window switch and make sure that you know which direction they go when transferring to the new switch. Mark the front with a small piece of tape so you know where to place them on the new switch.

Step 4 - Assemble New Switch

With the rockers in hand, you can then install them onto the new switch. Take an extra minute to reassure yourself that you have them facing in the right direction. Remove the tape, if you used any, and then connect the wires back to the switch. Pop back into the bezel holder and slide the assembly back into the hole in the door. Push the assembly back in place and make sure you hear the tab snap. Test out the rockers to see if the switch moves the way that it should.

Step 5 - Test Window

Turn your car on and see if the new power window switch works.

Item Specifics

Brand coils-autoparts

To Control Window

Type Window Switch

Placement on Vehicle Front, Left

Features Durable

Manufacturer Part Number coil15163601PS

OE/OEM Part Number 935703W300WK

Color Black

Interchange Part Number 935703W300WK

Superseded Part Number 935703W300WK

Manufacturer Warranty 1 Year

Location Side Front, Left

Condition New

Fitment Type Direct Replacement

Custom Bundle No

Mounting Hardware Included No

Package Quantity 1

Package Type Box

Package Contents 1 x Power Window Switch

OE Spec or Performance/Custom OE Spec

Material Plastic

Modified Item No

Performance Part No

Universal Fitment No

Attachment Method Push on

Connector Gender Female

Connector Quantity 2

Connector Shape Rectangular

Terminal Gender Male

Terminal Quantity 26

Terminal Type Blade

Voltage 12

Payment

We can accept Credit card, Debit card, Apple Pay, Google Pay, Visa, or Master Card, and so on. Thank you.

Please use the eBay checkout system when paying for your order.

Shipping

Product will be shipped within 2 business days after full payment is received and verified.

Delivery time is about 2-8 business days to most of addresses.

Returns

All of our brand new items come with a 60-Days money-back guarantee.

Contact Us

Please contact us first via email or message for replacement, refund or technical problem caused by any reason.

Warning

Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.

•

Coils-autoparts

DESCRIPTION

PAYMENT

SHIPPING

RETURN POLICY

CONTACT US

Shop Category

Store Home

Ignition Coil

▷ Car Ignition Coil

♢ Ignition Coil For Chrysler

♢ Ignition Coil For GMC

♢ Ignition Coil For Dodge

♢ Ignition Coil For Ford

♢ Ignition Coil For Cadillac

♢ Ignition Coil For Kia

♢ Ignition Coil For Hyundai

♢ Ignition Coil For Toyota

♢ Ignition Coil For Volvo

♢ Ignition Coil For Honda

♢ Ignition Coil For Mercury

♢ Ignition Coil For Lincoln

♢ Ignition Coil For Acura

♢ Ignition Coil For Jeep

♢ Ignition Coil For BMW

♢ Ignition Coil For Buick

♢ Ignition Coil For Saab

♢ Ignition Coil For Plymouth

♢ Ignition Coil For Mercedes-Ben

♢ Ignition Coil For Lexus

♢ Ignition Coil For Pontiac

♢ Ignition Coil For Saturn

♢ Ignition Coil For Scion

♢ Ignition Coil For Mini

♢ Ignition Coil For Audi

♢ Ignition Coil For Volkswagen

♢ Ignition Coil For Infiniti

♢ Ignition Coil For Nissan

♢ Ignition Coil For Jaguar

♢ Ignition Coil For Oldsmobile

♢ Ignition Coil For Seat

♢ Ignition Coil For Mazda

♢ Ignition Coil For Chevrolet

♢ Ignition Coil For Porsche

♢ Ignition Coil For Mitsubishi

♢ Ignition Coil For Land Rover

♢ Ignition Coil For Isuzu

♢ Ignition Coil For Lamborghini

♢ Ignition Coil For Suzuki

♢ Ignition Coil For Ram

♢ Ignition Coil For Fiat

Ignition Coil & spark plug

Fuel Injector

Fuel Pump

CV Axle

Transfer Case Motor

Car CV Axle

Window Motor & Regulator

Throttle Body

Headlight Assembly

Turbocharger

Spark Plug

Door handle

Window switch

Spoiler

Other

Hot Item

Fuel Pump Asembly & Sending Unit For Ford F-150 4.2L 4.6L 5.4L 2004 2005-2008

USD 41.99

Fuel Pump Module Assembly For Ford Ranger 2.3L 2.9L 3.0L 4.0L 1989-1997 SP37A1H

USD 38.99

Pair Front Power Window Regulator For Ford Bronco F100 F150 F250 F-350 w/ Motor

USD 55.99

Inline External Electric Fuel Pump For Ford F150 F250 F350 Ranger Mustang E2000

USD 26.39

Fuel Pump Assembly For Chevy GMC C/K 1500 2500 3500 1996-97 4.3L 5.0L 5.7L 7.4L

USD 37.49

Picture

New List Item

Left Driver Side Turbo For Lincoln Navigator 3.5L 2015 2016 2017 Turbocharger

USD 170.49

Left Driver Side Turbo For Ford Expedition 3.5L 2015 2016 2017 Turbocharger

USD 170.49

K03 Turbocharger For Audi A3 2.0L 2008-2013 Audi A3 Quattro 2.0L 2009-2013

USD 265.99

Left Driver Side Turbo For Ford F-150 3.5L 2013 2014 2015 2016 Turbocharger

USD 170.49

Left Driver For Ford Transit-150 250 350 350 HD 3.5L 2015-2022 Turbocharger

USD 170.49

Help & Info

Payment Policy

Shipping Policy

Return Policy

FAQ

About Us

Fits Kia Sportage 2010-2017 2.0L 2.4L 2.7L Power Window Switch Front Left Driver

Product Description

· Direct replacement - This power window switch fits, functions and matches the appearance of the original switch for a perfect replacement every time

· Quality construction - manufactured from premium materials for a long service life

· Excellent value - original equipment quality at a lower price

· Quality tested - has undergone simulation and endurance testing to ensure proper fit and performance

How to Install a Power Window Switch

Step 1 - Pry off Bezel

Using a flat head screwdriver you can pry up the bezel that the switch is in. You do not have to remove the door casing or the handle of the door. You simply pry gently on the power window switch bezel to get at the housing.

Step 2 - Remove from Bezel

Once the bezel comes loose, you will notice some tabs that hold it into place. Press down on the locking tab and it will come loose. Hold up the switch and bezel and look for some tabs that hold the switch to the bezel itself. Pry these with a little pressure from the screwdriver and pop the switch from the bezel.

Step 3 - Remove Rockers from Switch

Once you have the power window switch out of the bezel, remove it from the outlet. This is simply disconnecting it from the wire harness. Remove the rockers from the window switch and make sure that you know which direction they go when transferring to the new switch. Mark the front with a small piece of tape so you know where to place them on the new switch.

Step 4 - Assemble New Switch

With the rockers in hand, you can then install them onto the new switch. Take an extra minute to reassure yourself that you have them facing in the right direction. Remove the tape, if you used any, and then connect the wires back to the switch. Pop back into the bezel holder and slide the assembly back into the hole in the door. Push the assembly back in place and make sure you hear the tab snap. Test out the rockers to see if the switch moves the way that it should.

Step 5 - Test Window

Turn your car on and see if the new power window switch works.

•

Payment Shipping Returns Contact Us Warning

We can accept Credit card, Debit card, Apple Pay, Google Pay, Visa, or Master Card, and so on. Thank you.

Please use the eBay checkout system when paying for your order.

Product will be shipped within 2 business days after full payment is received and verified.

Delivery time is about 2-8 business days to most of addresses.

All of our brand new items come with a 60-Days money-back guarantee.

Please contact us first via email or message for replacement, refund or technical problem caused by any reason.

Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.

All rights reserved.