Browse Parts

MSD COMBO 1-MSD # 6425 6AL BOX, 1-MSD BLASTER 2 COIL #8202 & 1-MSD MOUNTING BRACKET #8213. The circuits are updated with efficient components that help the ignition produce more power while drawing less current!

Racerdirect.net Parachutes are proudly manufactured in the U.S.A. in Jupiter, Florida.

This is our latest design for the Jr 790 index cars. This Jr Dragster Parachute has a 4 foot canopy and is attached with Eight 9'.6" foot lines. With the new design this parachute weighs in at only 2.5 lbs.

Made in the U.S.A! The connectors are marked right and left and top and bottom. The front of the connector is one with a 45 degree angle cut at the end. The right side connector is the one with the parking brake cable pivot tab welded to it.

Two of the pictures show the back brace mocked up on the center housing. The center housing is NOT included. The back brace will fit 3" tubes. Auto racing is a hazardous sport.

Flange Yoke 1350 for a 8.8" Ford. 1350 Flange Yoke 8.8" ford. upgrade your 8.8" ford rear end to a driveshaft with 1350 u-joints. U-Joint Series 1350. WARNING: Cancer. Auto racing is a hazardous sport.

Grumpy's Toys: The Legendary Cars of Bill Grumpy Jenkins stands as a full and complete history of Jenkins' career to date as told through his cars, and has been heartily authorized by the man himself (Jenkins wrote the book's foreword.).

STRANGE ENGINEERING B4453WC HUBS, BRAKE KITS for Strange Aluminum Struts. You may see new kits listed for less, but make sure you know what you are getting! Many of those kits do not include the hubs.

Designed specifically for the’02-’06 Acura RSX, ’02-’05 Civic, and ’06-’15 Civic Si models, this damper fits K20A, K20Z3, K20A2, and K24A/Z engines. Compatibility: Honda/Acura K20A, K20Z3, K20A2, K24A/Z engines.

MagnaFuel ProStar 500 (part number MRF-MP-4401). : This pump is built to work withdead-head style regulators. Regulator Style. or rollover valve. : You must use a#8 AN tank vent. : -8 AN adjustable external bypass.

This Universal SFI 16.1 Harness has a 3" Wide Pull Down Individual Floor Mount Shoulder Harnesses that can Bolt into the floor or Bolt or Wrap to the roll bar running across just above the floor. The 3" Wide Lap Belts are Pull Down to tighten and can Bolt or Wrap in.

More than likely I have it.

Pulled from running altered

Set of two Mickey Thompson 50 Indy Profile N50-15 and two Eagle ST P235/60R14 tires mounted on matching aluminum racing rims. 15x9 rear and 14 x 7 front. Tires are in good shape . The Mickey Thompsons show some wear on the inside edge and all four tires have some minor weather checking on the inside sidewall. These 4 wheels came off a 1977 Dodge Aspen RT that I bought a few years ago and am restoring. I drove the car on these wheels for a short time. They have been stored in my garage since. I am not sure what make or model the aluminum rims are but they say “Pro Wheel” on the inside which may denote high quality. Bolt pattern is standard 5x4.5 and should fit all A-Body and F-Body Chrysler/Plymouth/Dodge cars.

UPDATED FOR 2025 / PEM HNF9 Stamped 9" Ford Center Housing, new. Are you tired of stripping down an old rusty housing?. These fit 2.89”, 3.062” and also 3.25" carriers. UPDATED FOR 2025 - 1 STEP HEAVIER GAUGE STEEL FOR STRENGTH.

FORGED 1350 Rear End Yoke for a 8.8" Ford with 1350 series u-bolts. 4" total length from center of u-joint to the end. Auto racing is a hazardous sport.

MADE BY ENDERLE FUEL INJECTION PART # 40363M. FUEL LINE KIT YOU ASK FOR IT.

This is a Non-SFI Universal diaper and will fit both Small Block and Big Block Motors. Color Black. This entire diaper is made from oil and water resistant materials and is fire retardant. The four side mounts attach with the header / exhaust bolts and the front two are attached with the water pump bolts.

APD Billet Enforcer boost reference blower carbies. 2-APD 750 CFM GAS 4150 BLOWER CARBS WITH #6 CLEAR FUEL LINES & BLACK APD CARB FITTINGS. YOU GET 2-APD 750 CFM GAS CLEAR COLOR CUSTOM ROOTS BLOWER CARBS & YOU GET THE #6 STAINLESS STEEL FUEL LINES WITH BLACK CARB FITTINGS, TO FEED YOUR MOTOR WITH 2 #6 LINES.

Need an easy solution to mount your TP628 lean out valve?! When installing switch disregard plastic if equipped. Valve not included.

The Lap Belts are 2" Pull Down Lap Belts that Bolt into the chassis. The submarine belt is 2" that will Bolt and or Wrap. Extension of the shoulder harness is 37" Max and 7" min. Extension of the lap belts is Max 60" and min 27".

More than likely I have it.