Results for “AMERICAN MOTORS”

SKU: EPR353. MPN: EPR353. Part Number: EPR353. Part Number EPR353. Manufacturer: Enginetech. Accurate push rod length is critical to engine longevity - undersized or oversized rods alter valve timing and can cause premature wear on lifters, rocker arms, and valve guides.

SKU: ERK407. MPN: ERK407. Part Number: ERK407. Part Number ERK407. Manufacturer: Enginetech. Wear, pitting, or pivot failure in even a single rocker arm disrupts valve timing and lift, causing lost compression, misfires, and accelerated guide and seat wear.

SKU: ERK5512. MPN: ERK5512. Part Number: ERK5512. Part Number ERK5512. Manufacturer: Enginetech. Wear, pitting, or pivot failure in even a single rocker arm disrupts valve timing and lift, causing lost compression, misfires, and accelerated guide and seat wear.

SKU: ERK400. MPN: ERK400. Part Number: ERK400. Part Number ERK400. Manufacturer: Enginetech. Wear, pitting, or pivot failure in even a single rocker arm disrupts valve timing and lift, causing lost compression, misfires, and accelerated guide and seat wear.

SKU: ERK409. MPN: ERK409. Part Number: ERK409. Part Number ERK409. Manufacturer: Enginetech. Wear, pitting, or pivot failure in even a single rocker arm disrupts valve timing and lift, causing lost compression, misfires, and accelerated guide and seat wear.

Manufacturer: Enginetech. Product Type Valve Stem Seal. Fits 11/32 stem. Premium silicone. Exhaust only. With guide OD under 0.625. with guide OD under 0.625. Thru 2/20/86.

Manufacturer: Enginetech. Product Type Valve Stem Seal. Intake and Exhaust Thru 7/26/99. With 8.0mm stem & 0.500 guide OD. With 5/16 stem & 0.500 guide OD. With 5/16 stem and 0.500 guide OD. With 8.0mm stem and 0.500 guide OD.

SKU: EPR378. MPN: EPR378. Part Number: EPR378. Part Number EPR378. Manufacturer: Enginetech. Accurate push rod length is critical to engine longevity - undersized or oversized rods alter valve timing and can cause premature wear on lifters, rocker arms, and valve guides.

MPN: ES646. Part Number: ES646. Part Number ES646. Manufacturer: Enginetech. Each camshaft is ground to original profiles and hardened for durability. Always install a new timing set and replace all lifters when replacing a camshaft - reusing worn lifters on a new cam lobe will cause rapid wear and premature failure.

Manufacturer: Enginetech. Product Type Valve Stem Seal. Iron head engines with 11/32 stem & 0.500 guide OD. May require shorter guide. With 11/32 stem & 0.500 guide OD. With 11/32 stem and 0.500 guide OD.

Manufacturer: Enginetech. Always order in even quantities. Groove profile: matches a 1-square grooved valve stem. Keepers must match the count and shape of grooves on the valve stem exactly - a mismatch will prevent proper spring retention.

Manufacturer: Enginetech. Product Type Valve Stem Seal. Iron head engines with 11/32 stem & 0.530 guide OD. May require shorter guide. With 11/32 stem & 0.530 guide OD. With 11/32 stem and 0.530 guide OD.

Intake and Exhaust position. Manufacturer: Enginetech. Product Type Valve Stem Seal. head engines. Fits 8.0mm stem. Premium silicone. Exhaust only. Fits 5/16 stem.

MPN: ES713. Part Number: ES713. Part Number ES713. Manufacturer: Enginetech. Each camshaft is ground to original profiles and hardened for durability. Always install a new timing set and replace all lifters when replacing a camshaft - reusing worn lifters on a new cam lobe will cause rapid wear and premature failure.

Manufacturer: Enginetech. Product Type Valve Stem Seal. Stem Bore (ID) 0.47". Engines With 8mm valve stems. 1983-1986 Buick Skyhawk 2.0L 122ci I4 OHV [VIN:P]. Valve Position Intake Only. Seal Material Viton.

Manufacturer: Enginetech. Always order in even quantities. Groove profile: matches a 1-square grooved valve stem. Keepers must match the count and shape of grooves on the valve stem exactly - a mismatch will prevent proper spring retention.