Browse Parts

Ultralight Aircraft LSA Trike Hovercraft Gyrocopter Airboat complete drive train with 3:1 tractor belt reduction. Width: ~30 mm\approx. Pitch (Distance between teeth): ~ 8 mm. Suggested Belt guidelines.

Connecting bar material: Aluminum.

These sails fit QuickSilver models Y, E, E DQ, and MX and may fit other models.

Weight ~ 18 lbs.

This propeller is being sold as used however it is in new good condition with only having been mounted to a propeller hub and never used on a flying or otherwise vehicle. Rotation as viewed from the tail of the aircraft: Clockwise (Right Hand).

Rotation as viewed from the tail of the aircraft: Counter-Clockwise (Left Hand). Bolt hole size: Sixed to fit AN 4 bolts.

This assembly from an unknown ultralight vehicle. Does not include the nose wheel itself. Rotation as viewed from the tail of the aircraft: Counter-Clockwise (Left Hand).

This propeller is being sold as used however it is in very good condition with only minor hanger rash. Rotation as viewed from the tail of the aircraft: Clockwise (Right Hand).

5 pieces of Quicksilver Ultralight Aircraft Conn, Tube 1 Inch Alu PN 20446. Condition is New. Shipped with USPS Retail Ground.

Here is an approximate break down of # of cables at what approximate length.

This propeller is being sold as used however it is in very good condition with minor hanger rash. Rotation as viewed from the tail of the aircraft: Clockwise (Right Hand). Material: Wood.

Appears to be a WARP drive propeller. Rotation: Right Handed/ Clockwise as viewed from the rear of the aircraft. Bolt hole spacing across center hole: ~2.9375” (~2 15/16”).

This propeller was manufactured by Tennessee Propeller Inc. one of the premier wooden propeller manufacturers/. Rotation as viewed from the tail of the aircraft: Clockwise (Right Hand). Number of bolts: 6.

Prop hub material: Combination of 2 aluminum plates and what looks like carbon fiber blade holders. This is a beautiful, functional 2 Blade ground adjustable propeller with wooden blades. Bolt hole spacing: ~60 Degrees.

This is a propeller guard from a Eipper/ QuickSilver Model Y over-the-wing Yamaha weight-shift ultralight. If you are restoring a QuickSilver to its original factory condition or you just want your plane to be authentic then this is a must have.

Adjustable 3 blade carbon fiber.

All Blade Holes sized for AN 4 bolts.

General condition: Used but in good condition.

Ultralight Aircraft LSA Hovercraft Air Boat ground adjustable 2 blade propeller looks like an original warp drive. Rotation: Right Handed/ Clockwise as viewed from the rear of the aircraft. Bolt holes are spaced at ~60 degree intervals around the center of the shaft hole.

It appears to never have been used on a flying vehicle. Rotation as viewed from the tail of the aircraft: Clockwise (Right Hand). Number of bolts: 6.

Distance from front panel to front of structure ~ 13.25 “.

Includes all Carburetor parts required, as shown, to convert a Bing Carburator to remote choke cable operation.

This propeller was manufactured by Tennessee Propeller Inc. one of the premier wooden propeller manufacturers/. It appears to never have been used on a flying vehicle. Rotation as viewed from the tail of the aircraft: Clockwise (Right Hand).