Browse Parts

Fender backs T68EX2WFB. Pair of Round Trailer Fenders (14"-16" wheels) &. Pair (2) of single round fenders & (2) Fender Back for TFT68EX.

2-Pair of 12" x 2" self adjusting electric brake assemblies with parts. 5 Hole Mounting. Works with Al-Ko, Dexter, and Quality Trailer Axles. Works on 5,200 lbs or 7,000 lbs trailer axles with a five hole brake flange.

Southwest Wheel 3,500 lbs. Trailer Axle Self Adjusting Electric Brake Kit 6-5.5. Pair of 10" x 2.25" self-adjusting electric trailer brake assemblies with parts. 4 Hole Mounting. For Alko, Dexter, Quality, or other popular trailer axle manufacturers.

Pair of Round Single Axle Trailer Fenders (14"-16" wheel). 16 gauge steel. 32"L x 9"W x 15"H. Add to Favorites.

Southwest Wheel 3,500 lbs. Trailer Axle Leaf Spring Kit (Leaf Springs & U Bolt). 2 x 4 Leaf Trailer Leaf Spring (1750 lbs). 4 Leaf Trailer Leaf Spring. 1 x 2 3/8" Round Trailer Axle U Bolt Kit. 2 3/8" Round Trailer Axle U Bolt Kit.

Black powder coat finish. RAM coupler.

RAM Trailer Jack Foot Plate w/ Pin – 5,000 lb Capacity – JF-100-Z – Zinc Coated for 2" Jack Tube. Enhance the stability of your trailer with thisRAM trailer jack foot plate, designed to handle up to5,000 lbs and built for long-lasting performance.

For 3,500 lb. 1750 lbs capacity per spring. Includes Bronze Bushings (Pre-Installed).

1 x71051WS - 5-4.5" Idler Hub. Designed for Dexter, Al-Ko, Lippert, Quality, Hayes, and Rockwell Trailer Axles with a 1 1/16" spindle. Make sure your bearing numbers match before ordering. All studs are 1/2"-20 with yellow finished zinc plating.

Zinc Adjustable Drop Leg Durable exterior grade black powder coat finish. Large black handle uses a bolt head fastener. this is to ensure the handle does not pop off during operation of the jack.

U-Bolt Kit for 3,500 lbs. 1 kit does an entire axle. Kit includes 4 - 2 3/8" u-bolts, 6 1/4" long, 2.44" ID width, 1/2"-20 thread, 3" thread length.

5 or 6 Lug closed push through center cap. 4.25" tall.

This Dexter® 3,500 lb. Brake flanges are pre-welded for future brake upgrades.

Pair of 12" x 2" self adjusting electric brake assemblies with parts. 5 Hole Mounting. Works with Al-Ko, Dexter, and Quality Trailer Axles. Works on 5,200 lbs or 7,000 lbs trailer axles with a five hole brake flange. Includes mounting hardware. These are fully assembled backing plates with shoes, springs, and magnets attached and ready to be mounted. The pair includes one left hand and one right hand brake assembly.

Dual Trailer Axle Suspension Kit (Leaf Springs, Hanger & U-Bolt kit). (Leaf Springs, Hanger & U-Bolt kit). 1 x Tandem hanger kit for 3,500 lb axle using double eye springs. Dual Trailer Axle Suspension Kit.

RAM 5 position Chanel and 2" RAM sleeve lock adjustable coupler. 2 7/8" inside. 11.5" inches long. 3 3/4" inches wide. 5 mounting positions. 7,000 lbs. capacity for 3" wide channel, comes with grade 8 nuts and bolts.

Bolt Circle Guide will be included to verify the correct hub has been sent. Will not work on marine axles. Fits Dexter, Al-ko, Hayes, Rockwell, Quality & Lipert Axles.

DeeMaxx 6,000 lbs. Axle, 12" Rotor & hub. 6 lug integral with Maxx coating. 1/2" wheel studs. 6-5.5" Bolt pattern. Works with Axles using Outer Bearing #15123.

Side wind Ram tubular swivel jack with weld-on pipe mount. Durable black powder coat outer tube and with a durable zinc finish inner tube. Grease zerk for easy greasing of jack. Includes a pin and lanyard assembly as well as a 2" raw male mating pipe.

(16) Trailer Wheel Lug Nut (#X1023R). • 60° Coned. • Fits standard 1/2" studs.

Offset Fork Trailer Leaf Spring Equalizer w/ 9/16" Nylon Bushings.

Southwest Wheel 3,500 lbs. Trailer Axle Electric Brake Kit 6-5.5" Bolt Circle. Pair of 10" x 2.25" electric trailer brake assemblies with parts. 4 Hole Mounting. For Alko, Dexter, Quality, or other popular trailer axle manufacturers.

Southwest Wheel 4,400 lbs. Trailer Axle Electric Brake Kit 6-5.5" Bolt Circle. Pair of 10" x 2.25" electric trailer brake assemblies with parts. 4 Hole Mounting. Only works on 4,400 lbs Lippert trailer axles with four hole brake flange.