Browse Parts

The SFI 16.1 Harness has a 3" Wide Pull Down V- Roll Bar Mount Shoulder Harness that Bolts to the roll bar behind the seat. The Lap Belts are 3" Wide Pull Down Lap Belts to tighten and can be Bolted or Wrapped in.

For a Kawasaki 750/900Slim Line, with 16/21 degree pitch. Shows sign of shelf wear. Included: Impeller.

Included: Ricks 2112-1168, 10-S111 Rectifier NOS. Item Overview.

9.5"Ford 40 spline spool and4.29 ratio 9310 PRO 35 spline Ring & Pinion for Drag Racing. PRO 9310 LW Ring & Pinions for DRAG RACING. PRO gear sets are manufactured in the USA from the finest heat treated 9310 steel.

9.5"Ford 40 spline spool and4.11 ratio 9310 PRO 35 spline Ring & Pinion for Drag Racing. PRO 9310 LW Ring & Pinions for DRAG RACING. PRO gear sets are manufactured in the USA from the finest heat treated 9310 steel.

This Universal SFI 16.1 Harness has a 3" Wide Pull Down Individual Floor Mount Shoulder Harnesses that can Bolt into the floor or Bolt or Wrap to the roll bar running across just above the floor. The 3" Wide Lap Belts are Pull Down to tighten and can Bolt or Wrap in.

This is a Non-SFI Universal diaper and will fit both Small Block and Big Block Motors. Color Black. This entire diaper is made from oil and water resistant materials and is fire retardant. The four side mounts attach with the header / exhaust bolts and the front two are attached with the water pump bolts.

Approximate size 10"x2". Item Overview.

Manufacturer Part Number: DA1250IN. Stripes Decal Approximate size 10"x4". Approximate size 10"x4". Included: Stripes Decal 10"x4". Item Overview.

THE HARNESS IS EQUIPPED WITH TYCO/BOSCH HEAVY DUTY 40/50 AMP RELAYS & APPROX. IT IS WIRED SO THAT WHEN PROPERLY INSTALLED IT WILL DISABLE THE NITROUS SYSTEM WHILE THE TRANSBRAKE IS ENGAGED. AS ALWAYS BE SAFE & TEST OPERATION IN A ?.

Wrap one end around a roll bar and adjust it through the slide bar. Attach the D ring to the door and then open up and attach the Quick Release latch and you are good to go. This item is NOT an overseas cheap manufactured part.

Used condition. Works like it should. Splines in great shape. Complete assembly. Questions, please ask!

Included: Diaphragm. Item Overview.

This Universal SFI 16.1 Harness has a 3" Wide Pull Down Individual Roll Bar Mount Shoulder Harnesses that will Bolt or Wrap to the roll bar behind the seat. The 3" Wide Lap Belts are Pull Down to tighten and can Bolt in or Wrap in.

This shoulder harness is tapered from 3" to 2" to slide into the neck restraint device. The Lap Belts are 3" Pull Down Lap Belts that Wrap/Bolt to the chassis. The submarine belt is 3" that will bolt or wrap.

The SFI 16.1 Harness has a 3" Pull Down V- Roll Bar Mount Shoulder Harness that bolts to the roll bar behind the seat. The 3" Lap Belts are Pull Down to tighten and bolt in. The submarine belt is 2" that will bolt and or wrap so the occupant can adjust to where it rides on the body.

These gloves are constructed from the lightest, highest quality fire retardant materials, which include a reinforced palm pad to reduce hand fatigue and grip points for the wheel. The overall frictions points have been wrapped in leather without loosing that tactile touch but minimizing that unnecessary vibration that can cause driver duress.

The belt has 3" Pull Down Lap Belts with Bolt in anchors. The submarine belt is 2" that will Bolt or Wrap.

The SFI 16.1 Harness has a 3" Wide Pull Down V- Roll Bar Mount Shoulder Harness that Bolts to the roll bar behind the seat. The Lap Belts are 3" Wide Pull Down Lap Belts to tighten and can be Bolted or Wrapped in.

The SFI 16.1 Harness has a 3" Wide Pull Down V- Roll Bar Mount Shoulder Harness that Bolts to the roll bar behind the seat. The Lap Belts are 3" Wide Pull Down Lap Belts to tighten and Bolt in. The submarine belt is 3" that will Bolt and or Wrap so the occupant can adjust to where it rides on the body.

The 1276LWC Hood Scoop is the lightest version of our standard 1276 scoop and features a flawless carbon fiber finish.

Performance MAHLE Rings 315-0073.005. FORD 302/351 4.155 ROUND BORE. 80" MLS-5 W/ H1502 H20 HOLES.